Geekam Doorbell Wireless Security Camera
$68.76 – $173.10
1. Longer battery life, longer standby
Doorbell powered by 3pcs 18650 batteries,3*2600mAh
The batteries can lase around 3 to 4 months between recharges with normal use(5-min events a day)
Live View: Up to 30 hours
2. Outer SD card slot, Easy to set up
Compared to Built-in SD card, it is much easier for users to set up the sd card based on the outer card slot
3. Easy to set up the video doorbell in the To see APP
You will never miss anyone or anything.
Get instant phone alerts when a visitor is at your front door or trigger the built-in motion PIR sensors.
Talk and see your visitors through your smartphone.
Compatible with IOS and Android Devices
1: Back. 2 Share. 3 Settings. 4 Battery. 5 Volume. 6 Playback. 7 Video effects. 8 Fullscreen. 9 Screenshot. 10 Talk to visitors. 11 Record.
4. PIR Motion Detection
When someone presses the doorbell, a notification will appear on your mobile phone.
You can answer the doorbell remotely using the APP anywhere.
Communicate directly through your device
5. Real-time Two-way Audio
The Video Doorbell is equipped with a Passive Infrared Radiation sensor, detecting the slightest motion at the entrance.
Phone alerts you when visitors are at your front door.
Hear and speak to people at your door from your mobile device with a built-in microphone and speakers.
6. 166-Degree Wide Angle Lens
Use the APP to get the full 166-degree view of your front porch.
See your visitors clearly and effortlessly.
7. Smart Night Vision
Switch to night mode on your APP, the light sensor on the doorbell will provide a clear view in the dark of night.
8. 2.4GHz Wi-Fi Compatible
The 2.4GHz Wi-Fi range of Video Doorbell is up to 20m(66ft), it easily connects to your home’s Wi-Fi network, sending a live video feed to your phone.
You can see and talk to the visitor from the comforts of your bed, from work, or while on vacation.
9. Share your video doorbell with your family.
Monitor and share to 4 devices. Up to 4 users may view the video feed, but only 1 user can use the direct intercom.
IOS and Android compatible
The basics mounting bracket
Connect the wires coming out of your wall to the screws on the back of your doorbell.
Please make sure the red wire can only connect the left screw and the other wire can only connect to the right screw.
Charging Time: 14 hours using 1A USB charger (not included)(via the doorbellmicroUSB port)
Please fully charge the 18650 batteries before use. The batteries can last around 3 to 4 months between recharges with normal use(5-min events a day). This also depends on the events captured.
Live View: Up to 30 hours
Lots of events:
If your device is capturing an excessive number of events every day, you might need to recharge your battery sooner. Plus, the battery is also drained each time you use the Live View to look or speak through your doorbell. To prevent excessive events you can adjust your motion settings to a lower sensitivity.
Install Your Video Doorbell On The Wall
Mark 4 drill holes and use a bit to drill holes in your wall and insert the anchors. Secure your doorbell on the wall with 4 mounting screws and 1 security screw.
- Display: NoneItercom: Yes
- Feature: PhotographItem Type: Video Doorbell
- Connection Type: WirelessAlarm: No
- Sensor: CMOS OV9732Chipset: Hisilicon 3518
- Video Resolution: 720P HD VideoMotion Detection: PIR Motion Detection
- Night Vision: IR Night VisionWiFi: 2.4G Wi-Fi Compatible
- Audio: Two-way Talk With Noise CancellationNotification: Notification Push To Mobile Device
- Lens: 166 Wide-angle Camera LensPower: 3-battery Or Hardwired (8-24V)
- 5 Stars
- 4 Stars
- 3 Stars
- 2 Stars
- 1 Stars